Tuning Stability + Bending Range + Low String Action.

The neck is a 5 piece 'vanishing point' laminate of cocobolo and rock maple, with a 10° headstock angle, magnetic truss rod cover plate, with a Stewart Macdonald truss rod. The cocobolo fingerboard is shaped to a 16" radius. The stainless steel frets are superglued in place during installation. The neck profile is carved by hand to a segment of a circle.

The mahogany body is chambered to .25" around the perimeter (with extra material left at the bridge and the neck pocket) with an african cherry (makore) top. Pictured to the right: the chamber is sealed with shellac just before the top is glued in place.

The high gloss body finish consists of multiple coats of shellac, a pore-filler called Z-poxy, and KTM-9 waterbase lacquer. This is the most environmentally friendly guitar finish available today. The neck is finished similarly to a satin sheen.

A Seymour Duncan JB in the neck position, a Custom Custom in the bridge position with a master volume, master tone, a Dimarzio Super Switch (Bridge, Bridge Coil Split, Neck + Bridge, Neck Coil Split, Neck).

Weighs in at 5.8 lbs

Click here to view the Warranty which applies to all STG instruments unless otherwise stated.